Starview Combo HD Setting
The Starview Combo HD has the tendency to create "freezing" by itself.
We recomment to update to the latest firmware which may make it a bit more stable.
- To prepare the receiver for C@rdSharing please follow the instructions below:
- Press menu / accessory /network.
- If you don't see server press 8989.
- Server -server setup , press ok.
- You should have 1 off 2 off 3off Up to 8 off
- Press ok on 1 off
- Change type to cccam.
- Name or IP address = First part of code.
- Port = part 2 of code (5digits)
- ID = third part of code
- Password = final part of code
- Deskey leave blank. You will probably need to change Type cccam to newcamd delete deskey and change back Type to cccam.
- Press apply.
- Exit out of everything and should be ok.
- On name or IP address do not enter C: just enter what follows after.
- To check status
- Menu/accessory/network/server
- You will have on number 01 cccam ****** ****connect If its wrong the same as above but with disconnect